The right ergonomic setup should adapt to your body, support frequent movement, and stay comfortable through a full workday.
If you and another adult take turns at one home office desk, you probably know the moment: the first person leaves, the second sits down, and everything feels a little off. The seat is too high, the armrests catch on the desk, or the monitor is still aimed at the other person. You can make a shared office chair work when both people fit it independently. The trick is to record two setups and restore them in the same order each time.
A discussion in Reddit’s OfficeChairs community raised a useful question: can one chair work when the two users are very different heights? That is one household’s experience, and height alone doesn’t settle the question. Two people of similar height can have different leg lengths or elbow positions. A chair you can reset quickly is only useful if both settings actually fit.
Check whether one chair fits both people
Set the chair up for each person separately, wearing the shoes they normally work in. Start with the person who has the harder time fitting the current setup. Sit all the way back with the feet supported by the floor or a stable footrest. Check for a small gap between the seat edge and the backs of the knees. Move the keyboard and mouse into normal working reach. Check that the shoulders can relax and that the chair can pull in without the arms hitting a drawer or desk frame.
Then have the other person do the same test. Compare which controls you needed to change and where you reached a limit. If one person can’t sit back because the seat is too deep at its shortest setting, raising or lowering the chair won’t solve the depth problem. If both people fit the seat but one can’t reach a tall keyboard surface without lifting their shoulders, the work surface may be the part that needs to change. The OSHA computer workstation chair guide explains the role of seat height, depth, foot support, and armrests. For measuring details, see our office chair size guide.
Make one settings card per person
Use two index cards or a shared phone note. Put the steps in the same order on both. Record what you can reproduce without guessing: a printed number, a count of detents from a known stop, or a photo of a control in its usual position. For a continuously adjustable seat, a floor-to-seat measurement taken the same way each time can help you get close. If the cushion compresses, take the measurement with the chair empty as a reference, then do the final fit check while seated.
- Seat height and foot support: Note the seat reference and whether to bring a separate footrest into place.
- Seat depth and backrest: Note the seat slide position if available, plus the backrest or lumbar setting you actually use.
- Arms and desk: Record the armrest position, whether they should clear the desk or stay low, and the desk’s seated height if it adjusts.
- Screen and input devices: Save a photo of the monitor angle and keyboard position. A removable mark on the desk can show where the keyboard goes.
Skip any setting that both people already share. If you mark a position, use a removable label on a fixed surface where it won’t block a control or moving part. You’re making a reference for the next handoff, so a short note you can read at a glance is more useful than a list of every possible adjustment.
Run the handoff in the same order
When you take over the desk, use your card: set seat height and foot support, then seat depth and backrest, then arms and the work surface. Move the screen last. Sit and type a couple of sentences, reach for the mouse, and look at the top part of the screen without tipping your head up. If something still feels off, check the earlier settings before moving the monitor again. For example, a footrest that’s still tucked away can make the seat feel too high even when the height mark is correct.
Try this for a week before replacing a chair that fits both people. If the same step keeps getting skipped, put that reminder first on your card. If there’s a mid-day handoff, keep the footrest or other accessory within reach. If you swap less often, two reference photos may be all you need.
What to look for if you’re shopping for a shared chair
Compare the published adjustment ranges with both users’ needs. Check which controls are easy to reach and whether either person must use the chair at the edge of its range. The OdinLake L3 is one option to check: its U.S. product page lists adjustable seat depth and armrests and provides dimensions you can compare against your notes. Those adjustments are useful only if the ranges work for both people and the arms clear the desk. Check the specific configuration you’re considering before buying; the presence of an adjustment alone doesn’t guarantee fit.
When a shared chair is the wrong answer
Use separate chairs or try alternatives in person if either adult still can’t sit back, reach the work surface with relaxed shoulders, or keep their feet supported after adjusting the setup. A household that needs two people working simultaneously also needs two work positions. If one person requires specialized seating or an accommodation, choose around that requirement first. For everyone else, start by checking each person’s fit independently, then make two short cards. The goal is to sit down and get to work without having to rediscover yesterday’s settings.



